How To Mount Tv In Rv Without Studs

As TVs have gotten thinner in size but drastically better in image quality, wall mounting has become increasingly pop. Mounting a TV on the wall tin assistance to save space by doing away with large, clunky entertainment consoles, while providing a cleaner, neater, more organized expect with no wires , cables or cords in sight. Acquire more here on how to hide Television receiver wires.

Most Boob tube mounts are designed for drywall, which makes for easy DIY products, but naturally requires the presence of studs. Wall studs are vertical pieces of wood that make up the frame that supports your walls. Drywall itself is a relatively brittle, and then trying to support your mount and Tv on drywall alone could mean a pigsty in the wall and a Goggle box on the floor. The studs provide a sturdy anchor betoken, ensuring that your mountain and Boob tube stay in place.

Unfortunately, depending on your living space and the construction of your home, the wall that you lot choose for your TV may not take studs. The adept news is that you tin notwithstanding mount your Tv set despite the hollow walls with Mount-Information technology's No Stud Boob tube Wall Mountain that hangs on your wall like a movie frame. Or, you can read on to larn other ways to mountain a Television on the wall without studs .

one. Anchors

Anchors are some of the easiest ways to hang anything in the walls without a stud. These work in different ways to go on screws from slipping out of their holes or otherwise damaging the drywall.

Toggle Anchors

Toggle anchors or toggle bolts look like normal screws just with a butterfly toggle at the terminate. When placed into the wall, toggle anchors work by anchoring to the back of the drywall. Pulling at the screw or otherwise placing any sort of outward force has no event as the toggle forces the entire canvas of drywall to resist instead of merely the crumbly core. In other words, it's the deviation between pulling at the whole wall and pulling at a single spiral.

Molly Bolts

These are a little harder to utilise than other drywall anchors, but they are extremely sturdy and well-suited for medium and heavy loads. These come in two variations, pointed and non-pointed. Pointed molly bolts take a sharp tip and tin can be installed with some gentle just forceful taps with a hammer. Non-pointed molly bolts, which are better for plaster walls, crave cutting out an installation hole first.

These bolts stay sparse when left untightened, just once tightened in your walls, the sleeve expands, creating an anchor to the back of your drywall. This is a like mechanism every bit toggle anchors. Once the molly commodities is securely anchored, you can remove the screw and replace it with the screws for your TV wall mount.

2. Mounting Plates

Along with these drywall anchors, consider using a mounting plate or cleat fabricated from metal or plywood. Mounting plates are placed behind the TV and screwed into the wall using whatever of the anchor screws above. The base of your Television receiver wall mountain can so exist screwed into the mounting plate. The thought with a mounting plate is that information technology adds several more than anchor points while creating a larger surface area to acquit the weight of the mountain and your TV.

If you lot are worried nearly aesthetics, cut your mounting plate smaller than the size of your TV so that the monitor hides the plywood or metal. If that's not possible, you can always pigment or stain the mounting plate to camouflage information technology or add an actress level of sophistication.

3. Ceiling Mounts

While non as common as standard wall mounts, mounting your Television from the ceiling is some other option if your walls don't have studs. This may be a bit more intensive process and non always feasible, but almost all ceilings accept beams or joists, which have the aforementioned function as studs. Depending on the design of your home, you may demand longer screws to reach joists, and these joists may be more spread out than you call up, but they should exist there.

How to Install Your No Stud Wall Mountain

What yous volition need:

Pencil or masking tape
Record measure
Level
Hammer
Philips head or flathead screwdriver
Tv set mount
Included mounting hardware (screws, spacers, etc.)

How to Mount your TV

Identify the wall mount in the desired position
Boom in 1 end of the wall mount, while maintaining a hand on the center base
Use a level to straighten
Once level, hammer in the other finish. Begin with the farthest nails commencement
Hammer in remaining nails (some nails may require more than forcefulness)
Spike VESA bracket to your Television set (fits VESA spacing 100, 200, 300, 400 and 600mm)
Set the tilt past attaching the included spacers to the lower VESA holes on your Goggle box
Pull cord to unlatch spring lock
Hang your TV on the wall mount *Recommended to have a friend to help*
Secure the TV in place by pulling the cord, which re-latches the spring lock

What to Go on in Mind

Anchors and mounting plates are an effective and a generally like shooting fish in a barrel way to keep TV wall mounts in place when your walls don't accept studs. While the process is generally straightforward, hither are some things you should continue in heed:

i. Be Aware of Your TV'due south Weight

Make sure that the wall ballast screws that you choose are rated to carry your Tv set's weight. Weights can vary from model to model, but the average 32-inch telly usually weighs about 25 to xxx lbs . That means that a larger screen will weigh more. E'er bank check the load capacity for the anchors that you choose.

Additionally, it is best to practise caution when lifting your device. Fifty-fifty a flat screen Television tin can accept a significant amount of weight. Therefore, having a friend assistance you with the mounting process is highly recommended.

2. Be Aware of Your Wall'south Condition

The strongest wall anchors volition not make much of a difference if yous're mounting a Television onto drywall or plaster that is old and aging. Walls that announced flimsy may really bow and bend nether the weight of your TV, potentially breaking at some point.

3. Use the Right Mountain for Your Television

The VESA pattern creates a standard pattern for wall mounts to ensure that they will fit any TV. However, mounts are rated to fit specific TV sizes and weights. For instance, a wall mountain for a 32-inch TV would non properly support the weight and dimensions of a forty-inch Boob tube. Choosing the incorrect mount could potentially lead to your monitor crashing to the floor and a damaged wall. Visit our blog on how to choose a Boob tube wall mount so you tin can avoid this problem.

iv. Consider the Mount Type

Almost of the anchor options for a studless wall piece of work best with fixed and tilting mounts. Fixed mounts are static and set at a singular position, while tilting mounts allow you to change the vertical bending of the mounted Tv set . As a general rule, toggle bolts and other wall anchors should not exist used with total-motion mounts. These mounts, which have arms and swivels that allow for complete angle adjustments, naturally add more weight. The constant movement that comes with adjusting your mounted TV tin can crusade increased stress on your anchor points and the wall itself.

If your wall has no studs, don't worry. You still take plenty of options for mounting your TV. If you are hesitant or not sure about these alternatives, it never hurts to phone call a professional who knows how to mount a TV on the wall without studs . It'southward amend to spend a little more money and ask for aid than to end up with a cleaved Tv and damaged drywall.

Once yous've settled on the right mounting bracket for your TV, you'll need to choose the right location, and position it at the right height. Proper wall positioning is essential when wall-mounting a TV, because your ability to adjust the Television position afterwards will exist quite limited, even with an articulated wall mount.

five. Choose the Right TV Position

First step is to choice your ideal wall. Ideally, it will be in a central location with ample seating and space. Even more important than the comfort is making sure the wall has access to all of the ability outlets necessary for your TV

From there, you must cull the right mounting height, usually with the center of the TV screen close to eye level when seated. Having a helper here is very useful, every bit ane person tin concord the TV, while the other checks the bending and position. From in that location, you can marker when you lot want to attach the mount.

Center the TV at the correct height, with the eye of the screen more or less at eye level. (This is where it helps to have a 2nd helper that can check the comfort and bending as you and some other helper hold the bodily Tv.) You can annotation the desired position by marker the lower right or left corner with pencil or masking record.

Sources:

ane: https://world wide web.digitaltrends.com/home-theater/how-to-wall-mountain-a-tv/

2: https://www.thisoldhouse.com/how-to/how-to-choose-right-hanging-hardware

3: https://itstillworks.com/12351048/how-to-install-a-ceiling-mount-tv

Source: https://mount-it.com/blogs/articles/how-to-mount-a-tv-on-the-wall-without-studs