TABLE OF CONTENTS

  • Supported models
  • Firmware upgrade
  • Installation
  • Offline server registration
  • Portrait manner
  • Proxy

Supported models

  • LS, SM, UH, XF, XS series

Finding out what model you lot have:

If you have a modell not listed above please contact support@dise.com, nosotros tin can help you check if your modell is supported.

Firmware upgrade

To update your webOS Signage firmware, follow the steps beneath.

  1. Download the latest version of firmware prototype file (.epk).

  2. Copy or move the downloaded image file into the /LG_MONITOR directory in your USB flash drive.

  3. Insert the USB flash drive carrying the firmware to update with, into the webOS Signage device.
  4. Follow the instructions on the screen 
              If yous have LS55A/LS35A model AND your SoC firmware version is earlier than v02.00.00, then store the prototype file in the /LG_DTV directory of your USB flash drive.

Installation

How to install Light on WebOS 2.0 and three.0

  1. Connect Ethernet cable.

  2. Connect power supply.

  3. Outset the screen and become through the initial setup guide.

  4. Make sure that the internal engagement/time on the screen is correct!

  5. Press and hold the Carte du jour or Settings push on the remote until a toast appears in the elevation right corner.

  6. Enter 8080 and click OK on the remote.

  7. Under Awarding Launch Mode, select "Local".

  8. Nether Fully QualifiedDomain Name, select "On".

  9. Enter the role player software URL (we recommend to employ a USB keyboard).

    This is i of the following:

    • http://become.dise.tv/webos2/scap_app.null (Or WebOS3 instead of WebOS2 devices)
      Used in the normal instance. The player needs to have internet access.

    • http://go.dise.telly/beta/x.y.z/scap_app.zilch
      ONLY utilise this when you lot have been instructed past DISE Back up to use a special version. The player needs to take internet access.

    • http://server-ip-or-fqdn/actor/scap_app.zilch
      Merely use this when the role player has no internet access and server is installed on-premises.

  10. For Local Awarding Upgrade, select "REMOTE".

  11. Respond Confirmwhen asked for Application Upgrade.

  12. You lot will now accept a confirmation saying "Success".

  13. Plow off the screen and plough it back on once again.

  14. Afterwards a little while, a 6-digit code, a discovery code, will be presented on the screen.

  15. This code is unique to the player. Make a note of it or take a photo because we volition need it in the next step, which is in DISE CX Portal.
  16. Log in to Portal and select the Playerstab.
  17. Click Addto create a new player.
  18. In the dialog actualization, enter a name, the 6-digit discovery code, and click Salve.
    If you have already created a content playlist you desire to play on the screen you lot may besides specify it here - otherwise yous can configure this later.
  19. You will notice that the actor software on the screen volition subsequently receive the settings, annals with CX Portal and download some content.

Offline server registration

In the instance when the screen does non have internet access, replace steps 13-18 with these:

  • Insert a USB keyboard in the screen.
  • Click the 5 button on the remote or tab down to "Click here to enter settings manually".
  • In the new dialog, enter the settings to connect to CX Portal.
  • The actor will register in CX Portal past the name "DISE", and play a default playlist.
  • Log in to CX Portal, locate the role player, and so set a new playlist by going into it, click Edit,so select a new playlist.

Portrait mode

How to flip the screen from Landscape into Portrait

  • Click and hold the Settings primal on the remote for 5 seconds.
  • A toast appears. Enter your countersign (default 8080) and then Ok.
  • Select Rotation.
  • Select the appropriate rotation from the list.

Proxy

We cannot support proxied connections to the server.